The 1” batting tape from Callie Del® is the perfect solution for joining two or more pieces of batting together on smaller projects. This lightweight stabilizer won’t gum up your machine, or add bulk to your project. • Machine quilting – easily add a piece of batting to a project where needed. • Hand quilting – soft enough you won’t even notice when needling through. • Stabilize seams, bias edges, and straight hems. • Reinforce edges of bags, tote bag handles, and other craft projects. • Works with 100% cotton, poly/cotton blends, and polyester battings. Protect your work surface accordingly. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying to the entire piece so you can adjust pressing times and heat as needed. 1. Preheat your iron to a medium or wool setting with no steam. 2. If using scraps of batting, it’s best to overlap their edges by a few inches and cut a wavy line through both pieces at the same time. Discard the scraps, and smooth the batting back together before applying batting tape. 3. For best results, try to keep the newly cut edges no less the 1/2in from the edges of the tape. 4. Place the rough side – or glue side – against the batting. Cover with a light pressing cloth, or Teflon sheet. Press and hold the iron in place for 8-10 seconds. Repeat by lifting the iron and placing it over the next area, slightly overlapping the first until the entire line is bonded together. 5. Allow to cool before testing adhesion, and repeat pressing if necessary. 6. Proceed with quilting to complete project.

• Style: Non-Woven
• Type: Fusible
• Content: 100% Polyester
• Color: White
• Weight: Lightweight
• Size: 1in x 30yds (2.5cm x 27.4m)
• Made In: China
• Care: Machine wash warm and tumble dry low. Dry cleanable.

[Product Specifications]

This one-sided fusible fleece from Callie Del™ is perfect for those times when you need a layer of softness, or a little extra body and stability in your home décor, craft, quilting, bag making, and apparel sewing projects. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed. 1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed. 2. Cut interfacings according to pattern instructions. 3. Preheat your iron to a medium or wool setting with NO STEAM. 4. Place the fleece face down on your pressing station with the rough side – or glue side – facing up. Place your fabric with wrong side down on top of the glue side of the fleece. 5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded. 6. After ironing, let the pieces cool before continuing with assembly process.

• One-sided fusible for easy application.
• Handy 1yd package is great for smaller quilted projects like table runners, tote bags, placemats, and wall-hangings.
• Add stability and body to home décor projects like pillows, footstools, and window treatments.
• Acid free so won’t discolor your fabrics over time.
• Sewing machine safe.
• Style: Fleece
• Type: One-Sided Fusible Fleece
• Content: 100% Polyester
• Color: White
• Weight: Midweight
• Size: 45in x 1yd (114.3cm x 0.9m)
• Made In: Mexico
• Care: Machine wash warm on a delicate cycle and tumble dry low.

[Product Specifications]

This Tri-Fold Swatch Card from Callie Del® contains samples of the interfacings and stabilizers that are contained in our line. See basic details at a glance to help you decide which product is best suited for each of your projects. You’ll find item numbers, content, dimensions, machine washing and drying guidelines, iron settings and more. The line of Callie Del® Interfacings are well stocked, high-quality goods offered at an attractive price point. Designed with the quilter, bag maker, crafter and garment maker in mind, our collection includes a diverse range of fusible and sew-in products. Callie Del® is exclusive to Checker Distributors and not available in chain stores.

• Store Sample - Not Intended for Resale

[Product Specifications]

This lightweight fusible interfacing from Callie Del™ is best used with wovens and knits like challis, chambray, jersey, broadcloth, and linens. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed. 1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed. 2. Cut interfacings according to pattern instructions. 3. Preheat your iron to a medium or wool setting with NO STEAM. 4. Place the rough side – or glue side – on the back side or wrong side of the materials to be fused. 5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 8-10 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded. 6. After ironing, let the pieces cool before continuing with assembly process.

• Use for Garment Sewing
• Single Sided Fusible Interfacing
• Adds Stability to Light to Midweight Fabrics without making them stiff
• Handy 1yd Package is great for smaller projects
• Machine Stitchable
• Style: Non-Woven
• Type: Fusible Interfacing
• Content: 100% Polyester
• Color: White
• Weight: Lightweight
• Size: 20in x 1yd (50.8cm x 0.9m)
• Made In: China
• Care: Machine wash warm and tumble dry low. Dry cleanable.

[Product Specifications]

This one-sided fusible fleece from Callie Del™ is perfect for those times when you need a layer of softness, or a little extra body and stability in your home décor, craft, quilting, bag making, and apparel sewing projects. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed. 1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed. 2. Cut interfacings according to pattern instructions. 3. Preheat your iron to a medium or wool setting with NO STEAM. 4. Place the fleece face down on your pressing station with the rough side – or glue side – facing up. Place your fabric with wrong side down on top of the glue side of the fleece. 5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded. 6. After ironing, let the pieces cool before continuing with assembly process.

• One-sided fusible for easy application.
• Handy 1yd package is great for smaller quilted projects like table runners, tote bags, and placemats.
• Add stability and body to home décor projects like pillows, footstools, and window treatments.
• Acid free so won’t discolor your fabrics over time.
• Sewing machine safe.
• Style: Fleece
• Type: One-Sided Fusible Fleece
• Content: 100% Polyester
• Color: White
• Weight: Midweight
• Size: 22in x 1yds (55.9cm x 0.9m)
• Made In: Mexico
• Care: Machine wash warm on a delicate cycle and tumble dry low.

[Product Specifications]

This 100% cotton interfacing from Callie Del™ is the perfect choice for those times when you need crisp support for medium weight woven and knit fabrics like oxford cloth, chambray, gingham, flannel, and polyester/cotton blends. • For use on cuffs, collars, yokes, pockets, facings, and other detailed areas that need crisp support in your garment sewing. • Use as a stabilizer for T-shirt quilt blocks. • Adds body and permanent stability for needlework and punch needle projects. Simply fuse on the back side of your base material. • Handy 1yd x 60in package is perfect for smaller projects. • Sewing machine safe. • If pre-shrinking is desired before applying to project, place in a bowl or sink of warm water and allow to soak for 15 minutes or more. Gently ring out and hang to dry. Do not place in washer or dryer by itself or you could remove the fusible side. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed. 1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed. 2. Cut interfacings according to pattern instructions. 3. Preheat your iron to a medium or wool setting with NO STEAM. 4. Place the rough side – or glue side – on the back side or wrong side of the materials to be fused. 5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded. 6. Adjust pressing times as needed for various weights of fabrics 7. After ironing, let the pieces cool before continuing with assembly process.

• Style: Woven
• Type: Fusible Interfacing
• Content: 100% Cotton
• Color: White
• Weight: Midweight
• Size: 60in x 1yd (152.4cm x 0.9m)
• Made In: Mexico
• Care: Machine wash warm and tumble dry medium. Dry cleanable.

[Product Specifications]

This 100% cotton interfacing from Callie Del™ is the perfect choice for those times when you need crisp support for medium weight woven and knit fabrics like oxford cloth, chambray, gingham, flannel, and polyester/cotton blends. • For use on cuffs, collars, yokes, pockets, facings, and other detailed areas that need crisp support in your garment sewing. • Use as a stabilizer for T-shirt quilt blocks. • Adds body and permanent stability for needlework and punch needle projects. Simply fuse on the back side of your base material. • Handy 1yd package is perfect for smaller projects. • Sewing machine safe. • If pre-shrinking is desired before applying to project, place in a bowl or sink of warm water and allow to soak for 15 minutes or more. Gently ring out and hang to dry. Do not place in washer or dryer by itself or you could remove the fusible side. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed. 1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed. 2. Cut interfacings according to pattern instructions. 3. Preheat your iron to a medium or wool setting with NO STEAM. 4. Place the rough side – or glue side – on the back side or wrong side of the materials to be fused. 5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded. 6. Adjust pressing times as needed for various weights of fabrics 7. After ironing, let the pieces cool before continuing with assembly process.

• Style: Woven
• Type: Fusible Interfacing
• Content: 100% Cotton
• Color: White
• Weight: Midweight
• Size: 22in x 1yd (55.9cm x 0.9m)
• Made In: Mexico
• Care: Machine wash warm and tumble dry medium. Dry cleanable.

[Product Specifications]

The 2” batting tape from Callie Del® is the perfect solution for joining two or more pieces of batting together on your larger quilts. This lightweight stabilizer won’t gum up your machine, or add bulk to your project. • Machine quilting – easily add a piece of batting to a project where needed. • Hand quilting – soft enough you won’t even notice when needling through. • Stabilize seams, bias edges, and straight hems. • Reinforce edges of bags, tote bag handles, and other craft projects. • Works with all batting types. Protect your work surface accordingly. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying to the entire piece so you can adjust pressing times and heat as needed. 1. Preheat your iron to a medium or wool setting with no steam. 2. If using scraps of batting, it’s best to overlap their edges by a few inches and cut a wavy line through both pieces at the same time. Discard the scraps, and smooth the batting back together before applying batting tape. 3. For best results, try to keep the newly cut edges no less the 1/2in from the edges of the tape. 4. Place the rough side – or glue side – against the batting. Cover with a light pressing cloth, or Teflon sheet. Press and hold the iron in place for 8-10 seconds. Repeat by lifting the iron and placing it over the next area, slightly overlapping the first until the entire line is bonded together. 5. Allow to cool before testing adhesion, and repeat pressing if necessary. 6. Proceed with quilting to complete project. Description

• Style: Non-Woven
• Type: Fusible
• Content: 100% Polyester
• Color: White
• Weight: Lightweight
• Size: 2in x 30yds (5cm x 27.4m)
• Made In: China
• Care: Machine wash warm and tumble dry low. Dry cleanable.

[Product Specifications]