Pellon SF101 Shape-Flex is an all purpose, woven, fusible interfacing. It provides crisp support for collars, cuffs, yokes, pockets, facings, and other detail areas of a garment. It can also add body and permanent stability when used as a backing for needlework and punch embroidery. Shape-Flex® is intended for light to medium woven and knit fabrics, including oxford cloth, chambray, gingham, madras, tattersall, pincord, flannel, and polyester/cotton blends. To pre-shrink, fill a sink with warm water. Place interfacing in water for about ten minutes. Do not put in washer or dryer by itself or you may loosen the adhesive. Gentle squeeze out excess water and allow to dry.

• Woven
• Fusible
• Weight: Lightweight
• Single Sided
• Washing/Drying instructions: Machine wash warm. Tumble dry medium, or dry clean. Iron at wool/steam setting.

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

1 Side fusible foam stabilizer consisting of foam layer between two soft fabrics. Ideal for crafts, accessories & home decor. Adds shape & body to projects like computer cases, purses & totes. 57% Polyester, 43% Polyurethane, 224gsm. Pre-cut - 2.5" Wide x 20 yards.

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

1 Side fusible foam stabilizer consisting of foam layer between two soft fabrics. Ideal for crafts, accessories, and home decor. Adds shape & body to projects like computer cases, purses & totes. 57% Polyester, 43% Polyurethane, 224gsm. Pre-cut 1 yard - 36" x 60".

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

Craf-Tex Double Sided Fusible Stabilizer is a heavyweight stabilizer that can be fused on both sides. Craf-Tex Double Sided Fusible Stabilizer is ideal for adding body to purses, hats, and other handcrafted items. This package contains two precut ovals. Craf-Tex Double Sided Fusible Stabilizer is designed for use as bottom supports in Aunties Two Patterns Perfectly Practical Bag, AT626. Pattern Not Included.

• Non-Woven
• Fusible
• Weight: Heavy
• Double Sided
• Washing/Drying instructions: Follow Fabric Care instructions

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

Experience the convenience and versatility of our Lightweight Fusible Interfacing, the perfect companion for your sewing and crafting projects. Similar in quality to popular brands like Pellon SF101 or Bosal 300, our Interfacing offers exceptional performance and ease of use. Crafted with precision and attention to detail, our lightweight Iron-On fusible Interfacing provides the perfect balance of structure and flexibility. Whether you're working on garments, accessories, or home decor items, this Interfacing adds stability and support without adding bulk, ensuring your projects maintain their shape and integrity.

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

Experience the convenience and versatility of our Lightweight Fusible Interfacing, the perfect companion for your sewing and crafting projects. Similar in quality to popular brands like Pellon SF101 or Bosal 300, our Interfacing offers exceptional performance and ease of use. Crafted with precision and attention to detail, our lightweight Iron-On fusible Interfacing provides the perfect balance of structure and flexibility. Whether you're working on garments, accessories, or home decor items, this Interfacing adds stability and support without adding bulk, ensuring your projects maintain their shape and integrity.

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

Finally! Batting that supports your stitches WITHOUT additional stabilizer. Hoop the batting and off you go! Supports up to 8,000 stitches per layer. This Cotton Batting features scrim for added strength and stability, this batting will not shift. You may also use this batting for small sewing machine quilting projects such as placemats, table runners and other quilt-as-you-go projects. This batting is NOT microwave safe, as it contains scrim.

• Made of: Cotton
• Needle Punched
• Contains Scrim
• Space between stitches: Quilt a max of 8 inches apart, Supports up to 8,000 stitches per layer

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

This 100% cotton interfacing from Callie Del™ is the perfect choice for those times when you need crisp support for medium weight woven and knit fabrics like oxford cloth, chambray, gingham, flannel, and polyester/cotton blends. • For use on cuffs, collars, yokes, pockets, facings, and other detailed areas that need crisp support in your garment sewing. • Use as a stabilizer for T-shirt quilt blocks. • Adds body and permanent stability for needlework and punch needle projects. Simply fuse on the back side of your base material. • Handy 1yd x 60in package is perfect for smaller projects. • Sewing machine safe. • If pre-shrinking is desired before applying to project, place in a bowl or sink of warm water and allow to soak for 15 minutes or more. Gently ring out and hang to dry. Do not place in washer or dryer by itself or you could remove the fusible side. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed. 1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed. 2. Cut interfacings according to pattern instructions. 3. Preheat your iron to a medium or wool setting with NO STEAM. 4. Place the rough side – or glue side – on the back side or wrong side of the materials to be fused. 5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded. 6. Adjust pressing times as needed for various weights of fabrics 7. After ironing, let the pieces cool before continuing with assembly process.

• Style: Woven
• Type: Fusible Interfacing
• Content: 100% Cotton
• Color: White
• Weight: Midweight
• Size: 60in x 1yd (152.4cm x 0.9m)
• Made In: Mexico
• Care: Machine wash warm and tumble dry medium. Dry cleanable.

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.

This 100% cotton interfacing from Callie Del™ is the perfect choice for those times when you need crisp support for medium weight woven and knit fabrics like oxford cloth, chambray, gingham, flannel, and polyester/cotton blends. • For use on cuffs, collars, yokes, pockets, facings, and other detailed areas that need crisp support in your garment sewing. • Use as a stabilizer for T-shirt quilt blocks. • Adds body and permanent stability for needlework and punch needle projects. Simply fuse on the back side of your base material. • Handy 1yd package is perfect for smaller projects. • Sewing machine safe. • If pre-shrinking is desired before applying to project, place in a bowl or sink of warm water and allow to soak for 15 minutes or more. Gently ring out and hang to dry. Do not place in washer or dryer by itself or you could remove the fusible side. Use Instructions: Note* It is always recommended to test the product on a scrap piece from your project before applying interfacings to the entire piece so you can adjust pressing times and heat as needed. 1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed. 2. Cut interfacings according to pattern instructions. 3. Preheat your iron to a medium or wool setting with NO STEAM. 4. Place the rough side – or glue side – on the back side or wrong side of the materials to be fused. 5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure for 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded. 6. Adjust pressing times as needed for various weights of fabrics 7. After ironing, let the pieces cool before continuing with assembly process.

• Style: Woven
• Type: Fusible Interfacing
• Content: 100% Cotton
• Color: White
• Weight: Midweight
• Size: 22in x 1yd (55.9cm x 0.9m)
• Made In: Mexico
• Care: Machine wash warm and tumble dry medium. Dry cleanable.

[Product Specifications]

[Shipping & Fulfillment]

Orders are fulfilled through our distributor network and ship via FedEx Ground. Most orders ship within 1-2 business days of placement.